Monodax MXScan (Tunercat / Jet DST) OBDII Support  

Go Back   Monodax MXScan (Tunercat / Jet DST) OBDII Support > TunerCat Discussion > TunerCat / JET OBDII Hardware and Software

Notices

TunerCat / JET OBDII Hardware and Software Questions and Answers for TunerCat's OBDII Tuner, WinFlash OBDII software, and JET's Dynamic Spectrum Tuner

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 09-09-2006, 03:43 PM
Keno's Avatar
Member
 
Join Date: Sep 2006
Posts: 7
Looking for a list of GM Table acronyms.

Hello all. Can we do a sticky for the newbies like me that list what all the GM engine controlls and tables are and a short definition of what they do like example below? I'm going through the list of tables, and some of these i don't even know what they are. Kind of like this.

DFCO=Decelleration Fuel Cut Off When you lift foot off throttle it slowly backs out fuel delivery so engine doesnt get instant fuel cutoff when throttle body is slammed shut. and blah blah
LTFT=Long Term Fuel Trim
SHFT=Short Term Fuel Trim
BLM=Block Learn Mulitiplier

I like the SCT superchips setup/layout for Fords alot more than JET setup as you can click on a particular table and get a little paragraph to the right that pops up and it tells you what that particular sensors function is in charge of. I know this was the original program, but i have the JET setup now and am trying to relate the HP tuner info on the 1998 vortec 4.3 V-6 to the tables in my JET DST tuner.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old 09-09-2006, 08:42 PM
Member
 
Join Date: Jan 2006
Posts: 68
Have you seen the ls1 SCT software? It may be compatible with the v6's.
Tunercat was not originally intended for amateur usage. OBD1 stuff was, at one point, professional level only.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old 09-10-2006, 04:01 PM
Keno's Avatar
Member
 
Join Date: Sep 2006
Posts: 7
Yes i looked at that but

Quote:
Originally Posted by hrodgmc View Post
Have you seen the ls1 SCT software? It may be compatible with the v6's.
Tunercat was not originally intended for amateur usage. OBD1 stuff was, at one point, professional level only.
Yes i looked into that, but at the time of my purchase only JET had the running software and blackbox to be able to tune my 4.3 vortec. I already have and use a handheld realtime scanner/troublecode delete. i just needed the capability to read and rewrite the GM compter settings to my liking. I know it only does two VINs..but i only bought it for my truck and not planning on doing cutomers vehicles. I'll leave that to the pros..Although its nice to have expandability for 150.00 if i want to add more VINs if i ever buy another vehicle. I have one spare for my next vehicle still.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4 (permalink)  
Old 10-22-2006, 04:51 PM
Senior Member
 
Join Date: Oct 2006
Posts: 493
Still Looking?

Keno:

Did you ever get that info?

Fred
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #5 (permalink)  
Old 10-24-2006, 12:47 PM
Senior Member
 
Join Date: Oct 2006
Posts: 493
Info

Keno:

In case you did not yet find the info, use the link I have included here below. Hope this helps!

General Tuning Information for New Tuners

Fred
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Good List of OBD1 .bin files AussieLS1evil TunerCat File Request 5 07-07-2006 07:10 PM
COT table 96/chevy/pu TunerCat / JET OBDII Hardware and Software 1 01-20-2006 10:43 PM
TunerCat OBDII Parameter List (Definition File E) Monodax TunerCat / JET OBDII Hardware and Software 10 12-02-2005 12:15 AM
Table Help PartsGuy TunerCat / JET OBDII Hardware and Software 4 07-03-2005 02:45 PM


All times are GMT -4. The time now is 09:00 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.2.0
Copyright (c) 2010