8.1L Vortec to Cable Throttle

[busta9876]

So i'm working on a 2003 8.1L PCM. In the past to do a cable throttle body, I've taken a 6.0L express van from the same year and copied over all the engine stuff manually, this takes some time but it works well.

Is there an easier way to do this that will work? Like just change the diagnostics around and the Installed Options Matrix?

The operating system on the 2003 6.0 express with cable and the 2003 8.1 with drive by wire are the same.

[busta9876]

here are the two calibrations.
2003 8100 with drive by wire throttle
2003 6.0l express van with cable throttle

[AJxtcman]

I forgot to do this. Hmmm

[AJxtcman]

Import Calibration Modules.



Selected Modules


I have never done this and I didn't know what all to select.
See if this works.
2003 8.1L 4L80E Express Van 2wd XTest.cal

[AJxtcman]

Originally Posted by AJxtcman

I have never done this and I didn't know what all to select.
See if this works.

For your application I imported too many modules. I compared the new file to the old files to determined that. I would think that you would want to import modules first and then copy and paste back. I will see if I can come up with some proof for my reasoning.